Fully automatic foundation machine 610mm

Fully automatic foundation sheet machine
This machine makes it possible to produce foundation sheets in a single operation by the casting method. The liquid wax is fed to the machine from a tank with a capacity of approx. 130kg (in case of need, tanks with a capacity of up to 250 kg are available) through an inlet tank. As the wax arrives between the cylinders, it congeals to form a wide foundation band that is cut to length and width on the attached cutting machine. The desired width is adjusted by moving the round knives as required, whereas the length is adjusted by means of a counting preselector, the preset figure being the length in millimeters. Deviations in length and width are less than 1 mm.

The foundation sheets are stacked on a lifting table from where they can be removed for packing. At low temperatures, cast foundation sheets are not as elastic as rolled foundation sheets.

Regular cell pattern of approx. 800 cells per dm2 (square decimeter). Special cell patterns of 750 cells-830 cells are available against extra charge. The cell pattern is reproduced on both sides.